Feb 11 2007

Willow Basket

Published by at 11:55 am under Plant Materials

Willow is very fast growing tree. That makes the wood weak, but the strong bark keeps an integrity to it. Harvest the red shoots, they are usually the best ones. The shoots that are still red has a large pith, but the bark is strong, so that they can be folded without breaking.

Harvest in winter, when the sap is down, the shoots seems to be less brittle then and their water content is lower. But still, dry them before you use them, to avoid the baskets becoming loose. It is better to reconstitute them afterwards, before using them. That wasn’t neccesary with these shoots though, as they were so strong. When harvesting, there is no need for tools, the easiest method is just to rip them off the trunk with your hands.

To start the weaving, overlap four willows like on the photo. But four will not do it. It has to be an uneven number, otherwise the weave will end on the same place and that will not make a basket.

When you feel the gaps between the spaces become unmanagable, add in an even number of new strands. If you add in an uneven number, the result will be even and will not work (Said differently: Not 5+5=10, but 5+4=9.). Cut off all of the ends on the inside, as that will be hard to do on the finished basket.

When you have the size of the bottom you want, bend up the strands and tie them together in the top to keep them like that. Start weawing upwards. It is messy in the start, but if you are careful to keep the weave tight it will become progressively easier as you move upwards.

Weave it as high as you want it. When the top has become stable on it’s own, you can release it in the top, that will make further weaving easier. Splice on the outside, as trimming later on the inside will difficult.

Cut off the tops at a good lenght. Make them pointy, that will make tucking them back into the weave easier. Tuck them back over into the neighbouring strand.

Finally, trim off all the ends and the basket is finished.


Get my book "Traditional Trout Fishing: Fishing for Survival in the North (Volume 1)

4 responses so far

4 Responses to “Willow Basket”

  1. Mungoon 11 Feb 2007 at 3:35 pm

    Brilliant post, thanks for the clear instructions. We have a lot of willow growing here locally, I will weave a basket. I wonder if you could cover the basket in clay, and leave it over the ashes of a fire, so that you can make a water-proof container for water and food.

  2. torjusgaarenon 11 Feb 2007 at 4:30 pm


    I don’t think that with the clay will work, as the clay will shrink and crack. You could however try to only cover the inside, dry and burn it. I think I remember that some groups made pottery that way. The basket will of course burn off.

    But you could coat it with pitch to make it waterproof, that is possible.

    Look forward to seing the result on your blog. 😉

  3. Sassmouthon 14 Feb 2007 at 7:38 pm

    In a couple pictures near the end there are pretty long pieces sticking out. Why didn’t you continue further weaving with them? Were they getting too narrow?

  4. torjusgaarenon 15 Feb 2007 at 5:52 pm

    Yep, I thought they were getting a little too thin. If I wanted to save on material I could have continued them a little longer though.

Trackback URI | Comments RSS

Leave a Reply

You must be logged in to post a comment.